Proximity Sensor - 8 mm Diameter, Shielded, Normally Closed - NPN Controls and provides it to ShopFloorConnect

and provides it to ShopFloorConnect

and turns Off when metal enters the sensing field

The receiver only needs to detect a very small amount of light from the emitter for the sensor to actuate

This photosensor may also be compatible with some legacy Wintriss products

Proximity Sensor - 8 mm Diameter, Shielded, Normally Closed - NPN Controls and provides it to ShopFloorConnectWintrss's 8 mm diameter shielded inductive proximity sensors are extremely useful general purpose die protection sensors. This sensor has a threaded housing, and should be secured into an M8 x 1 threaded hole with thread locker. If the sensor is to be removed from the die during maintenance, epoxy it into a removable bushing or insert. This inductive proximity sensor is Normally Closed, in other words, it actuates when metal leaves the sensing field,